Products
   Apricus Solar Collector
   Sentinel-Pro Controller
   Heat Dissipator
   Solar Conversion Valve
  Products > Apricus Solar Collector > Technical Information

Solar Collector Links
Introduction
Main Features
Technical Information
Key Components
Warranty


Technical Information

Apricus Solar Collector General Specifications

Manifold Casing Material Aluminium (grade 3A21)
Frame Material 1.5mm 304 Stainless Steel
Header Pipe Material 99.93% pure Copper & lead free 45% silver brazing
Insulation Compressed Glass Wool - K = 0.043W/mK
Rubber Seals and Rings HTV grade silicone rubber
Optimal installation angle 20-70o Vertical, -5o to +5o Horizontal
Maximum Operating Pressure 8bar - 116psi
Optimal flow rate 0.1L/min/tube - 0.026G/min/tube
Performance Data ( SPF) Conversion Factor: ho = 0.717
Loss Coefficients: a1 = 1.52, a2 = 0.0085

 

Model Specifications
Model AP-Demo AP-10 AP-20 AP-22 AP-30
Overall Length (mm / inch) 1 660 / 25.9" 1980 / 77.9"
Overall Width (mm / inch) 376 / 14.8" 796 / 31.3" 1496 / 58.8" 1636 / 64.4" 2196 / 86.4"
Overall Height (mm / inch) 156 / 6.1" (including flush roof mounting frame)
Absorber Area (m2 / ft2) 2 0.08 / 0.86 0.8 / 8.6 1.6 / 17.2 1.76 / 18.9 2.4 / 25.8
Fluid Capacity (ml / ounces) 190 / 6.4 290 / 9.8 510 / 17.2  550 / 18.6 833 / 28.2
Gross Area (m2 / ft2) 3 0.25 / 2.67 1.57 / 16.95 2.96 / 31.8  3.24 / 34.8 4.35 / 46.8

Dry Weight (kg / pounds)

8 / 18 35 / 77 64 / 140 71 / 157 95 / 209

1. Length and width do not include the inlet and outlet which protrude from either the rear or ends of the manifold.
2. Absorber area calculated as: D x L x N where:
.....D = diameter of the absorber tube, in this case 0.047m
.....L = exposed length of tube: For 1.8m tubes this is 1.72m
.....N = number of tubes (4, 10, 20, 22, 30)
.....Eg. 0.047 x 1.72 x 20 = 1.6m2 absorber area (1m
2 = 10.76ft2)
3. Calculated simply as overall length (including frame) x overall width.
4.

AP Models are named as follows:
AP(Manifold Casing Colour)(Port Location) - (Tube Number)
Manifold Casing Material: K = Black, S = Silver
Port Location: R = Rear, E = End
Tube Number: 4, 10, 20, 22, 30
Eg. APKR-20 = black rear port 20 tube manifold.

Note: Depending on region certain colour/port options may not be available.

For more information on this or any other Apricus products,
please contact your local Apricus distributor.